Sewage Cutter Pump 3 Phase
FEATURES:
At the inlet of the electric pump, high hardness carbon steel cutting disc is installed for high-speed cutting combined with carbon steel blade, which has strong crushing capacity.
Vortex blade is adopted, which has better passing performance and higher efficiency.
The rotor shaft is made of 304 stainless steel and 45# steel by fric-tion welding, which is more wear-resistant and corrosion resistant.
The electric pump cavity is equipped with a motor protector, which can automatically disconnect the power supply when the overload heat of the motor is too large to ensure effective and safe operation.
Description
SERVICE CONDITIONS:
Based on the center of the impeller, the submerged depth shall not exceed 5m
The temperature of conveying medium shall not exceed 40 ° C
PH value of conveying medium is 4-10
The volume ratio of solid phase of conveying medium is less than 2%
The maximum particle size of solid phase in the conveying medium shall not exceed 5mm
The maximum density of medium is 1.2 x103kg / m3
The power frequency is 50Hz, the single -phase voltage is AC 220V, the three-phase voltage is
AC 380V, and the voltage fluctuation range is 09-1.1 times of the rated voltage.
