Submersible Raw Water Pump

Submersible Raw Water Pump

APPLICATIONS:

Suitable for use with water that is not chemically aggressive towards the materials from which the pump is made.
As a result of their reliability and the fact that they are easy to use, and suitable for use in applications such as clearing dirty water, discharging domestic waste water, and for emptying collection traps containing suspended solids up to a maximum ofφ8mm.

Get Enquiry
Category:

Description

MOTOR:

Two-pole induction motor(n=2850 r.p.m)
Insulation Class B
Protection IP68
Continuous service S1
Thermal protector
Single-phase 220V/50Hz

COMPONENTCONSTRUCTION:

Pump body: Technopolymer
Suction filter: Technopolymer
Impeller: Noryl
Motor shaft: AISI304 SS,
Mechanical seal: Ceramic/Graphite
Cable: 6m power cable with plug

OPERATING CONDITIONS:

3m maximum immersion depth
Liquid temperature up to 35°C
Maximum ambient temperature 40°C

Related products

SWIMMING POOL PUMP

APPLICATIONS:

Filter centrifugal pumps are designed forcleaning swimming pool,They are suitable to transfer high volumes of water (not exceeding 45°C) against low head.The pump should be installed in an enclosed environment,or at least sheltered from inclement weather.

OPERATION CONDITIONS:

  • Two-pole induction motor(n=2850 r.p.m)
  • Insulation Class B
  • Protection IP44
  • Continuous service S1
  • Thermal protector for single phase
  • Single-phase 220V/50Hz
  • Three-phase 380V/50Hz

MOTOR:

  • Liquid Temperature up to 45°C
  • Ambient Temperature up to 40°C
  • Total suction lift up to 5m
 
COMPONENT CONSTRUCTION:

Pump body: Techno-polymer
Impeller: Techno-polymer
Motor shaft: AISI304 SS
Mechanical seal: SIC/Graphite

Contact us