Self Priming Jet Pumps (SS Casing)

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The self-priming jet pumps are designed to pump water even in cases where air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure sets, and for the irrigation of gardens and allotments, etc. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Get Enquiry
Category:

Description

MOTOR:

  • Two-pole induction motor(n=2850 r.p.m)
  • Insulation Class B
  • Protection IP44
  • Continuous service S1
  • Thermal protector for single phase

COMPONENT CONSTRUCTION:

  • Pump body: AISI 304 SS
  • Pump support: Aluminum
  • Motor housing: Aluminum
  • Impeller: AISI304 SS
  • Diffuser: Techo-polyner
  • Motor shaft: AISI304 SS
  • Mechanical seal: Ceramic/Graphite

OPERATION CONDITIONS:

  • Liquid Temperature up to 60°C
  • Ambient Temperature up to 40°C
  • Total suction lift up to 9m

SWIMMING POOL PUMP

APPLICATIONS:

Filter centrifugal pumps are designed forcleaning swimming pool,They are suitable to transfer high volumes of water (not exceeding 45°C) against low head.The pump should be installed in an enclosed environment,or at least sheltered from inclement weather.

OPERATION CONDITIONS:

  • Two-pole induction motor(n=2850 r.p.m)
  • Insulation Class B
  • Protection IP44
  • Continuous service S1
  • Thermal protector for single phase
  • Single-phase 220V/50Hz
  • Three-phase 380V/50Hz

MOTOR:

  • Liquid Temperature up to 45°C
  • Ambient Temperature up to 40°C
  • Total suction lift up to 5m
 
COMPONENT CONSTRUCTION:

Pump body: Techno-polymer
Impeller: Techno-polymer
Motor shaft: AISI304 SS
Mechanical seal: SIC/Graphite